logo
Enviar mensaje
Inicio Noticias

Humidity Range of Temperature and Humidity Test Chamber

Certificación
Porcelana Dongguan Quality Control Technology Co., Ltd. certificaciones
Porcelana Dongguan Quality Control Technology Co., Ltd. certificaciones
Comentarios de cliente
La pantalla táctil que el probador micro de la dureza de los vickers ha estado instalado hace unas semanas, todo es ACEPTABLE. Gracias por su consejo y servicio excelente.

—— Sr. David Chambers

Las gracias por la entrega rápida y nuestro cliente muy se satisfacen por el probador de la dureza de Rockwell, y esperan más órdenes pronto.

—— Neil Renato

Después de que visitáramos al cliente, finalmente decidían comprar el probador Brinell iBrin-413Z de la dureza, ahora nosotros han instalado la unidad en el sitio de cliente,

—— Fermin Lee

Gracias por los penetradores (diamante  cono 120 grados). Lo conseguimos recientemente y lo probó ya. Penetradores  sea bueno como esperamos. 

—— Dalius Skinulis

Las medidas son buenas para el probador Brinell HBST-3000.

—— Sun Chull Kim

Ey, el probador iVick-484ST de la dureza fue instalado la semana pasada y trabaja bien, las gracias por la ayuda profesional.

—— Sabinian Smith

Estoy alegre informarle que la instalación del probador Brinell de la dureza de SHB-3000C se ha acabado con éxito. ¡Quisiera agradecerle!

—— Robbin

Estoy en línea para chatear ahora
Compañía Noticias
Humidity Range of Temperature and Humidity Test Chamber
últimas noticias de la compañía sobre Humidity Range of Temperature and Humidity Test Chamber

 

Humidity Range of Temperature and Humidity Test Chamber

 

1. Humidity range of constant temperature and humidity test chamber

 

We know that the humidity of constant temperature and humidity test chamber is relative, such as 50%RH at 30℃; 85%RH at 85℃, and so on, rather than from the lower limit of high temperature to the lower limit of low temperature with humidity in the entire temperature range, low temperature means no humidity.

 

Some users have lower humidity requirements for programmable constant temperature and humidity test chambers, such as 15%RH or 5%RH low humidity requirements, etc., but few people ask about the humidity range of 0%RH. Because we all know that 0%RH humidity means no humidity requirements.

 

Just as high humidity of 98%RH is better than humidity of 100%RH, because humidity of 100%RH indicates that moisture is saturated, and saturation equals water.

 

2. What is the humidity when the constant temperature and humidity test chamber is set to 0℃?

 

This depends on whether the operator sets the temperature to 0 °C or the humidity to 0% relative humidity (RH).

 

If the set temperature value is 0, that is, there is no humidity, then this type of equipment cannot be used, because humidity cannot be used at temperatures below 5°C.

 

If the humidity is set to zero, there is no humidity. The humidity range of the general constant temperature and humidity environment test equipment is 20% to 98%RH. The so-called relative humidity refers to the relative temperature of the generated humidity. Not all temperatures can have humidity.

 

There is dry or evaporative humidity, such as high temperatures above 90°C, which basically has no humidity. Below the usual humidity of 5°C, humidity is impossible, because at low temperatures, the moisture in the air will frost or freeze, so 0°C humidity is impossible.

 

In fact, it is possible to set the humidity to 0%, but this only sets the humidity display to 0%, indicating that the humidification system of our equipment will not humidify, but it is impossible to require that there is no water molecule in the air, just as unrealistic as using the best dehumidification equipment in the world.

 

Tiempo del Pub : 2024-08-01 09:59:45 >> Lista de las noticias
Contacto
Dongguan Quality Control Technology Co., Ltd.

Persona de Contacto: Mr. Raymond Chung

Teléfono: 86-13711988687

Fax: 86-769-22784276

Envíe su pregunta directamente a nosotros (0 / 3000)