Automatic Digital Brinell Hardness Tester iBrin-3000V with Motorized Lifting System Technical Specifications: Commodity iqualitrol Fully Automatic Brinell Hardness Tester Model iBrin-3000V Test Force kgf 30kgf, 31.25kgf, 62.5kgf, 100kgf, 125kgf, 187.5kgf, 250kgf, 500kgf, 750kgf, 1000kgf, 1500kgf, ... Leer más

Metal Coating Hardness Test Method Metal coatings mainly include electrodeposition layer, self-catalytic coating, spray coating (including explosion spray coating and plasma spray coating) and aluminum anodized coating layer. Generally, the coating is relatively thin, and its hardness is often ... Leer más

Spectrum Grinding Machine iSGM-2-300 Brief Introduction: The iqualitrol iSGM-2-300 adopts spray coating technology for the whole machine. Two discs are independently operated and stepless speed control. Special cover design can effectively guarantee the safety of grinding samples. There is a dust ... Leer más

Altitude Chamber QAH-150C Simulating Altitude and Temperature for Combined Environmental Testing Technical Specifications: 1, Commodity: Commodity Model iqualitrol Altitude Test Chamber QAH-150C 2, Capacity and Dimension Nominal internal volume 150L Internal dimensions External dimensions W500xH600x... Leer más

Infinity Parallel Optical System iqualitrol Stereo Microscope NSZ-806 with LED Illumination Description: 1, Excellent Image Quality & Optical Performance with Infinity Parallel Optical System. 2, Comfortable Operation with Ergonomic Design Principle. 3, With LED light for both incident and ... Leer más

Limitations of Hardness Test 1) Hardness value alone cannot reflect the mechanical properties of different materials. For different materials, if their tensile strength (σb), yield strength (σs, or 00.2), elongation (ε), cross-sectional shrinkage (ψ) and impact toughness (ak) or impact energy (Ak) ... Leer más

What is Austenite? Austenite is a metallic, non-magnetic solid solution of carbon and iron that exists in steel above the critical temperature of 1333°F ( 723°C). Its face-centered cubic (FCC) structure allows it to hold a high proportion of carbon in solution. In many magnetic alloys, the Curie ... Leer más

Advantages of Hardness Test in Application 1) When testing hardness, the stress state of its loading mode is the softest (a>2), that is, the maximum shear stress is much greater than the maximum normal stress. Any metal material will undergo plastic deformation under this stress state, and the ... Leer más

Ductile Fracture of Metal Materials There are many ways for engineering materials to fail, and fracture is one of them. Other failure modes include deformation, wear, corrosion, etc. Fracture failure is the most dangerous and often causes casualties or major economic losses. Fracture is also divided ... Leer más

Horizontal Tensile Testing Machine MG-1103S Conform Testing Standards: GB/T2792, ASTM D3330, GB2792-81 Application Ranges: The MG-1103S horizontal testing machine is developed and designed for tape peeling tests. It uses a microcomputer chip for control and can perform tensile and peeling force ... Leer más